Fault Codes

If there is a problem with your 2X2, the warning light will illuminate in the top bar of the LCD display and a fault code will show in the odometer area. Fault codes can also be read using the UBCO App.

There are two types of codes:

• Cautions: These codes will start with C-XXXX. These codes are labelled as cautions due to the fact the they will not stop the bike from operating but still require attention, as the bike may no longer meet safety or compliance standards.
• Faults: These codes will start with F-XXXX These codes are labelled as faults because they relate to a specific fault on the bike that leads to the not bike operating correctly. They require immediate attention and may require servicing by an UBCO certified technician.

Examples:

If the first number in the code is 1, it relates to something in the front of the bike; if it is a 2 it relates to something in the rear. Some common Caution codes are listed here. C faults indicate a warning that the bike is experiencing a problem but can still operate. If the fault persists follow the remedy indicated or contact your service provider.

Some common Fault codes are below. Codes beginning with F indicate a warning that the bike requires immediate attention. Follow the remedy indicated or contact your service provider.